Banner
Home > Hua Hin Information > Content

How to repair orange paint on garment bag opening machine

How to repair orange paint on garment bag opening machine

Garment bag opening machineAfter a period of use, the paint will fall off due to various reasons, which often troubles many sewing machine users because they don't know how to deal with it. In fact, after the paint surface of the bag opener has fallen off, it can be completely solved by maintenance technology, but usually does not pay much attention to it. At present, the better solution for repairing orange paint on the clothing bag opener is to use the same brand and the same original machine. Orange paint products. The commonly used tools for repairing the orange paint of the bag opener mainly include tweezers, files, scrapers, shovel, brushes, wood grain pens, etc.; commonly used filling and abrasive materials include 502 glue, wood flour, sandpaper, cotton cloth, cotton yarn, fine steel sand, etc. Wait.

开袋机.png

The specific steps for repairing the orange paint of the clothing bag opener are as follows: First, the repair and filling of the machine should be smooth and free of deformation; the second is to color and polish the repair area of ​​the bag opener. According to the observation of the furniture, it is necessary to distinguish the color, mixed color, two-layer color and three-layer color of orange paint, and then carry out the corresponding treatment; the third is the gloss treatment of the orange paint of the clothing bag opening machine, which must be bright and matte of the machine Light-based. For sanding, polishing and glossing water, etc. In this process, the auxiliary materials used can be wax and abrasive; the fourth is the filling operation, pour 502 glue in the place where the garment bag opener needs to be filled, then use putty to fill in the area that needs to be repaired, pour 502 glue, and dry File flat after drying. The fifth is to trim the protruding parts or excess parts to restore the original shape. Use sandpaper to polish, pour 502 glue repeatedly, cooperate with shovel or polish to make the filling part relatively smooth and even. If it cannot be polished accurately, use sandpaper to wrap the blade plane, and then polish the part that needs to be filled. Repeat the process again until it is completely flat.

服装开袋机.png