Banner
Home > Hua Hin Information > Content

Matters needing attention when refueling computer bag opener

Matters needing attention when refueling computer bag opener

To extendComputer bag opening machineIts service life keeps it light, stable and low-noise normal working condition. In addition to proper use, attention should also be paid to daily maintenance and frequent refueling to clean and lubricate all moving and connecting parts inside the computer bag opener. If you do not pay attention to maintenance for a long time, it will scale and rust and increase the friction between parts. This not only increases the use noise, but also accelerates wear and tear, which affects sewing performance. So, what should we pay attention to when refueling the computer bag opener?

电脑开袋机.png

First of all, we should pay attention to the quality of lubricant. The computerized bag opener is one of the more precise machines in daily industrial products, and the lubricant it uses is very particular. Usually bottled sewing oil, seed oil or white mineral oil is used, and other vegetable oils such as motor oil and peanut oil are not used. Because these oils are relatively greasy, they may stick to the parts of the computer bag opener, resulting in inflexible operation. In severe cases, it may even cause the machine to fail to run, which will cause a lot of trouble. Therefore, you need to pay attention to the quality of lubricating oil when refueling computer sewing machines.

Also pay attention to the amount of fuel. For computerized bag openers that have a large workload and are frequently used, lubricating oil should be added before or after use, and only one drop per place is enough. For machines that are not frequently used or the workload is small, lubricating oil can be added once a month or before each sewing. For the computer bag opener that is not used for a long time, we need to add more oil to the oil-filled parts one by one, and apply oil to the surface of the parts without electroplating and spraying to avoid rust. In addition, after each oil filling, you must make the computer bag opener run, and then wipe off the oil on the surface, especially the oil on the upper part of the machine head, so as not to contaminate the sewing material.

深圳电脑开袋机.png