Banner
Home > Hua Hin Information > Content

How to maintain the computer pattern machine

How to maintain the computer pattern machine

As we all know, any machine equipment, includingComputer pattern machine, After a long time of use, daily maintenance and regular inspection and maintenance are required. Therefore, in order to ensure that the computer pattern machine is used more smoothly, thereby extending its service life, we need regular maintenance and maintenance. Next, Dongguan Huaxin Sewing Equipment Co., Ltd. will explain in detail how to maintain the computer pattern machine.

电脑花样机.png

For the computer pattern machine, it is different from the mechanical sewing machine. It has many different tasks and more tasks. Therefore, our maintenance of it mainly includes the lubrication, cleaning and cleaning of some parts. During the lubrication process, it should be noted that the amount of oil should not be too much, as long as 1 to 2 drops are enough. At present, the lubrication parts of the computer pattern machine mainly include the oil holes of the machine head, the upper shaft and the upper shaft connecting parts, the movable parts of the lower parts of the machine plate, the inside of the face and the connecting movable parts of each part, the presser, the connecting rod and its Connecting parts and other movable connection parts. In this way, in order to avoid problems such as wear, damage, and frictional overheating of various connected movable parts during the use of the computer pattern machine, the entire machine cannot be used.

For the cleaning of the computer pattern machine, it is mainly divided into the cleaning of the feeding teeth, the cleaning of the shuttle bed and the cleaning of other parts. The cleaning steps for the cloth feeding teeth are as follows: first remove the screw between the needle plate and the cloth feeding teeth, remove the cloth hair and dust, and then add a small amount of sewing oil. For the cleaning of the shuttle bed, due to the core component of the computer pattern machine of the shuttle bed, it is also a very prone to failure. Therefore, we need to clean it from time to time and add a small amount of sewing machine oil after the cleaning is completed. The cleaning of other parts mainly refers to the cleaning of the surface of the machine and the internal parts of the panel. It also needs to be cleaned frequently, and after the cleaning is completed, lubricating oil is added.

电脑花样机.png

Through the above explanation, I believe many people will think that the maintenance of the computer pattern machine is very simple. But in fact, in the process of our maintenance, we need to pay attention to many things. Carelessness may shorten the service life and even cause the machine to be scrapped. For example, when starting work, check the main parts, the severity of the stepping, whether there is a special sound, whether the needle is normal, etc. If an abnormal phenomenon is found, it should be repaired in time; after the work is completed, insert the needle into the pinhole plate and lift the pressure Feet, cover the machine head with a hood to prevent dust from entering; and when the computer pattern machine is used for a long time, it needs to be overhauled. If you find parts with greater wear, replace them with new ones.