Banner
Home > Industry knowledge > Content

How to maintain sewing equipment

Careful cleaning and cleaning to ensure that the parts of the computer car are clean is the basis for ensuring the assembly quality and prolonging the service life of the computer car. Especially the shaft sleeves, bearings, oil pumps, and parts containing rotating and swinging fittings should be carefully cleaned.

If it is not clean when assembling various shaft parts, it will cause the shaft sleeve to heat up too high and the transmission torque to be too heavy. In severe cases, it will accelerate wear due to debris and cause serious failures such as"occluding", affecting the overall machine performance.

All computer car parts that have undergone surface baking, electroplating and other surface treatments have adhesive layers on their assembly joint surfaces (including holes, grooves, planes and screw holes). Therefore, such parts must be Process technology requirements, first finish machining, then assembly and deployment

If the assembly does not meet the specified technical requirements, the computer car will not work properly. The incorrect mutual position between components and mechanisms also affects the performance of the computer car.

The computer car is assembled for the first time or after a major repair, which has a great impact on the performance of the equipment. Computer cars with poor assembly quality have low accuracy, poor performance, loud noise, heavy torque, and short life. On the contrary, some parts with low accuracy can still be assembled with performance after careful selection and assembly and precise adjustment. Better equipment.

Compared with special sewing machines that can only be used in the clothing industry, sewing equipment has great advantages. It can be applied to all kinds of handbags, clothing, textiles, leather goods, luggage, shoes, belts, sports and recreational equipment, etc. Pattern sewing in the sewing industry. It is easy to break the thread and the needle during use, which also affects a certain production efficiency. If you can understand and avoid some precautions before use, it is very helpful to the use process and production efficiency.

The use environment of any electronic appliances has strict requirements on electrical interference and electromagnetic interference. Sewing machine is also a mechanical and electrical machine, please use this machine in an environment without strong electrical interference and magnetic field interference, because strong electrical and magnetic field interference may cause the machine to malfunction or cause safety hazards. Sewing users should read the operation manual of this machine carefully before operation. If the machine is operated by untrained personnel or the operation is wrong, it may cause a safety hazard and cause serious harm to the enterprise.

Although one of the advantages of the machine is that it can guarantee 24 hours of high-intensity work, the use of the machine can not be ignored, and the regular cleaning of the machine can not be ignored. To use this machine, it is necessary to frequently remove dirt and add a small amount of sewing machine oil. It is best to carry out a comprehensive maintenance every one to two years and replace the more worn parts to reduce the machine failure rate. This also improves production efficiency and maximizes the investment value of a sewing machine.